Description
10 Piece half cut stubby TORX® set. The new and improved version of our HCT1050 – now packaged on a green magrail! T10 through T50. 1/4″ Square drive with 3/4″ OAL. 1/2″ cut drivers. Heat treated, S2 Steel, satin chrome finish.
$54.11
10 PIECE HALF CUT STUBBY TORX SET ON MAGRAIL
11 in stock
10 Piece half cut stubby TORX® set. The new and improved version of our HCT1050 – now packaged on a green magrail! T10 through T50. 1/4″ Square drive with 3/4″ OAL. 1/2″ cut drivers. Heat treated, S2 Steel, satin chrome finish.
Weight | 1 lbs |
---|---|
Dimensions | 7 × 3 × 2.5 in |
Grade / Rating | |
Drive | |
Features | |
Type | |
Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
T50 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T47 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T45 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T40 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T30 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T27 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T25 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T20 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T15 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
T10 – 1/2 CUT Torx Driver, 1/4″ square drive, 3/4″ OAL, S2 steel
1/4″ Angle Wrench 15 X 80 degree flat profile open end wrench
5/8″ Angle Wrench 15 X 80 degree flat profile open end wrench
1/4″ Square Drive adapter with 1/4″ Hex shank for HBR12 and RST4
10mm Angle Wrench 15 X 80 degree flat profile open end wrench
Reviews
There are no reviews yet.