$186.13
89 piece bit set with 1/4″ flex ratchet
Set includes a wide array of popular bits: metric & SAE hex, Phillips, ACR, slotted, triple square (XZN), TORX ®, TORX ® Plus, TORX ® tamper resistant, TORX ® Plus tamper resistant, MORTORQ, square (Robertson) and clutch. Bits are made of S2 steel. Features super low-profile sockets with special 1/4’’ male hex drive. 3-way bit and socket locking flex head ratchet can be used as a low-profile ratchet, used with extension bar for deep reach or as a “T” speed handle.
| Weight | 5 lbs |
|---|---|
| Dimensions | 14 × 6 × 4 in |
| Case Quantity | TBD |
| Bar Codes | 0-92308-82989-1 |
| Country Origin | Taiwan |
| Drive | |
| Length |
You must be logged in to post a review.
All VIM tools carry a Limited Lifetime Warranty unless mentioned otherwise. Any tool that fails during normal use
will be repaired, replaced or a repair kit will be sent to you. Please note, consumables are not covered under warranty.
3 piece 1/4″ mini flex bit/socket ratchet and t-handle
4″ EXTENSION BAR – 1/4″ DR.
10mm LOW PROFILE SOCKET – 1/4″ HEX DR.
9mm LOW PROFILE SOCKET – 1/4″ HEX DR.
Out of stock
8mm LOW PROFILE SOCKET – 1/4″ HEX DR.
7mm LOW PROFILE SOCKET – 1/4″ HEX DR.
6mm LOW PROFILE SOCKET – 1/4″ HEX DR.
Out of stock
5.5mm LOW PROFILE SOCKET – 1/4″ HEX DR.
5mm LOW PROFILE SOCKET – 1/4″ HEX DR.
1/4″ Hex Magnetic Driver, 1/4″ hex shank
PA2 PHILLIPS ACR BIT – 1/4” HEX DR X 1”L
PA1 PHILLIPS ACR BIT – 1/4” HEX DR X 1”L
2mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
2.5mm Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
1/8″ Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
1/4″ Hex Insert bit, 1/4″ hex shank, 1″ long, natural finish
Out of stock
TR40 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
Out of stock
TR30 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
Out of stock
TR27 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
Out of stock
TR25 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
TR20 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
Out of stock
TR15 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
Out of stock
TR10 TORX® TAMPER RES. BIT 1/4” HEX DRIVE X 1” LONG
P2 PHILLIPS SCREWDRIVER BIT X 1/4” HEX, 1” LONG
P1 PHILLIPS SCREWDRIVER BIT X 1/4” HEX, 1” LONG
P0 PHILLIPS SCREWDRIVER BIT X 1/4” HEX, 1” LONG
5/32” FLAT TIP SCREWDRIVER BIT X 1/4” HEX, 1” LONG
T8 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T40 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T30 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T27 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T25 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T20 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T15 TORX® BIT X 1/4” HEX SHANK, 1” LONG
T10 TORX® BIT X 1/4” HEX SHANK, 1” LONG
Stubby Flat and Philips Set,10pc., 1/4″ square Drive S2 drivers, 6 Flat drivers, 4 Philips (SFP)
234 in stock
Power Drive Metric Hex Bit Set
MORTORQ SUPER 6 pc set MT00, MT0, MT1, MT2, MT3, & MT4
IMPACT XZN Driver Set 10 pc, Power or Hand Approved, 3/8″Sq. Drive
Reviews
There are no reviews yet.